Atom Server

The most cost effective 1U servers we sell! This is our very popular Atom 1U Server, perfect for someone needing a low powered cost effective rackomount server.

We had some requests for some more 1U rackmount Atom servers from some of our various clients. 

Here we are using the Supermicro 1U 5015A-EHF-D525 Barebones SuperServer. The barebones includes the 502L-200B Chassis, X7SPE-HF-D525 Atom Motherboard and 200W Low Noise Power supply. 

This 1U chassis can support upto 1 x PCI-E x16 expansion card, 1 x 3.5" hard drive or 2 x 2.5" hard drive/SSD using a the appropriate bracket.

They are also short depth rackmount chassis's so can be installed in any desired cabinet.

These Servers are the ideal solutuon for VoIP PBX systems 3cx, Asterisk, FreeSwitch and small web server applications

Atom Server

 

The system configuration our client was going for in this particular order was:

1 x 4GB DDR3 1333MHz SODIMM

1 x Crucial 120GB M500 SSD

1 x Intel I350-T2 Dual GbE Network Card

 

 

One important thing to note is, while these atom motherboards officially only support upto 4GB of memory (2 x 2GB Max) you can install upto 8GB (2 x 4GB) if you select a particular type of SODIMM memory. You will need to make sure you use SODIMM 4GB memory that has 256MBx8 memory chips rather than memory that has 512MBx4 memory chips. 

In our systems we use Hypertec Hyperam HYS31325684GB. These memory SODIMM modules use 256MBx8, so work perfectly with these atom systems. 

 As with all our servers we build, we make sure 100% that each component is compatiable with each other. 

atom server

 

 

 

 

Here you can see the rear I/O of the server:

  • 2 x PS2 ports
  • 2 x USB 2.0 ports]
  • 1 x Serial port
  • 1 x VGA (D-Sub) port
  • 2 x Intel 82574L Gigabit LAN ports

 

 

 

 

 

atom server

The systems have now been fully integrated and are ready for testing. Our Testing procedure is run the server for 24 hours non stop, while running different stress testing software, to get the get the server hardware running at 100%. This is when we will find out if there are any issues with the system itself.

This particular client did not require any operating system install, however if you do you require an operating we can of course re-install this for you as well as any other software configution set up.

Now completed, this order is ready to be shipped to our customer in London.